The sequencer is basicaly 4 voice of saturn sequencers in a custom built case, they can all run independently from their own internal clocks or can run in sync from a single clock source.
I am building a clock divider so each sequencer can run at 1/1, 1/2, 1/4, 1/8, 1/16 clock speeds simultaniously, selected by a rotary switch, eg. seq 1 runs at 1/1, seq 2 at 1/2, seq 3 at 1/4 etc. or any combination you like. I have ideas to build a more complex clock source to generate non linear sequences.
Step length is selected by a rotary switch instead of patch cables.
I’d also like to add a glide / portamento function but I’ve not worked out how to do this yet, a simple S + H circuit maybe? any ideas welcomed.

The case is made from pine with a translucent polycarbonate front panel, the 40 LED’s are mounted underneath so it lights up in operation. I’ve built this for live use, sequencing my circuit bent gear.